Steel shot has been around since the mid-seventies, when the first s110 steel shot was introduced into the hunting community.

The introduction of steel shot came on the back of environmental concerns over the use of lead shot. Lead is a toxic metal, and it was found that waterfowl were building up dangerously high levels of this heavy metal in their bodies from eating lead shot that had dropped into wetlands.

Some states banned the use of lead shot in wetland areas, but this only worked for a short time. Hunters soon realized that hunting these areas with steel shot gave them an advantage over other hunters who were still using lead. This caused many to switch to steel, sometimes illegally.

Steel shot has been around since the mid-seventies, when the first s110 steel shot was introduced into the hunting community. The introduction of steel shot came on the back of environmental concerns over the use of lead shot. Lead is a toxic metal, and it was found that waterfowl were building up dangerously high levels of this heavy metal in their bodies from eating lead shot that had dropped into wetlands.

Some states banned the use of lead shot in wetland areas, but this only worked for a short time. Hunters soon realized that hunting these areas with steel shot gave them an advantage over other hunters who were still using lead. This caused many to switch to steel, sometimes illegally.

S110 steel shot is easier on your shotgun.

Steel shot is harder than lead. Steel shot has a hardness of 8 to 9 on the Mohs scale. It also has a significantly higher density than lead, which means it will penetrate deeper.

As steel pellets are much harder than lead, they will create more friction in your gun's barrel and could cause damage if you don't use the right choke tube. For this reason, you should only shoot steel shot through an improved cylinder, modified or full choke tube.

This friction can heat up your barrels and damage the finish on the inside of your barrel over time.

Using an improved cylinder choke tube that creates a looser pattern allows the pellets to spread out more quickly, which helps reduce friction and heat buildup in your shotgun's barrel.

When shooting steel pellets, it's important to use full power shells rather than low-recoil loads as they have more energy behind them. The extra energy helps push the pellets out of the barrel before too much heat builds up inside your gun.

S110 steel shot is environmentally friendly.

As a new generation of environmentally friendly abrasives, S110 steel shot is widely used in the automotive industry, ship manufacturing and other industries.

S110 steel shot is a kind of new type steel shot which has undergone special processing and treatment by using high-quality cast iron scrap as raw material and using advanced production technology. Because the particles are spherical and smooth, and the surface is compact, there will be no cracks or pores on the surface after impact, so it has no pollution to the environment.

It has good toughness and toughness, only 1/3 of the steel ball, with low consumption and high efficiency. Used in sandblasting equipment can greatly improve the service life of equipment and reduce maintenance costs.

The S110 steel shots produced by Shandong Kaitai Group have good fluidity. The products are smooth and hard, with strong cutting force. It can completely replace imported products, meet environmental requirements for surface treatment of automotive parts, aluminum alloy parts, medical equipment parts and automobile manufacturing industries.