Due to various reasons such as steam, leakage of cooling system, volatile substances and impurities, it is inevitable that they will be mixed into the lubricating oil, which will contaminate the lubricating oil. After the lubricating oil is mixed with water, it will have an affinity with water to emulsify the oil to form an emulsion, which reduces the lubricating performance. At the same time, water reacts with sulfur and chloride ions in lubricating oil to generate sulfuric acid and hydrochloric acid, which will accelerate the deterioration of lubricating oil and make lubricating oil lose its lubricating effect. Therefore, the lubricating oil must be filtered by the lubricating oil filter to ensure the cleanliness of the oil and increase the utilization rate of the oil.

When choosing a lubricating oil filter, we need to do the following three points: 1. Which lubricating oil to filter? What is the level of oil cleanliness required? 2. Which filtering form should be used according to the above requirements? 3. After determining the filtering form, how many levels of filtering should be used in the design? This can be selected according to past experience, or by professional filter equipment manufacturers.

Lube oil filtration is a critical element in the efficient operation and maintenance of compressors, large engines, and other equipment in refineries. Inefficient filtration cannot meet oil usage requirements, and poor and unstable oil quality will lead to emergency repairs and shutdowns of the system within short time intervals, resulting in mechanical damage and higher maintenance costs. Therefore, to filter clean, it is necessary to purchase a special oil filter for lubricating oil to ensure that the filtered oil meets the requirements.

YUNENG is an oil filter equipment manufacturer with rich manufacturing experience, and can provide you with professional solutions for lubricating oil filtration according to your needs.

After the anti-wear hydraulic oil has been used for a period of time, there will be particles, moisture, gas and other pollutants in the oil. If you want to reuse the oil, you must filter out the internal impurities. If you want to filter out these impurities accurately, the best way is to use an oil filter dedicated to anti-wear hydraulic oil.

YUNENG produces special hydraulic oil filter which can efficiently remove moisture, gas and impurity particles in oil.